2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Sep 2011


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

  5. Read the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

  5. Clear the DTCs.

← DIAGNOSIS SYSTEM (from Jan 2012)FAIL-SAFE CHART (Sep 2011 – Dec 2011) →