REMOVAL
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedures for the LHD and RHD.
- The procedures listed below are for the LHD.
- Use the same procedures for the LHD and RHD.
| 1. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY RH |
![]() ![]() |
Using a moulding remover, detach the 5 claws.
Disconnect the connector and remove the armrest base panel.

| 2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY |
Detach the 2 claws and remove the regulator switch.


