2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Sep 2011

HINT:
  1. Use the same procedures for the LHD and RHD.
  2. The procedures listed below are for the LHD.


1. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH

B180817
  1. Using a moulding remover, detach the 5 claws.

  1. Disconnect the connector and remove the armrest base panel.


2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY

  1. B182892
    Remove the 3 screws and master switch.

← COMPONENTS (from Sep 2011)INSPECTION (from Sep 2011) →