2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL KNOCK SENSOR

A241523E01
  1. Install the 4 sensors with the 4 bolts so that the sensors are angled as shown in the illustration.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

    NOTICE:
    The acceptable installation angle of the sensor is between 10° upward and downward from the horizontal position.

    Text in Illustration 
    *A
    for Bank 2 Sensor 1
    *B
    for Bank 1 Sensor 1
    *C
    for Bank 2 Sensor 2
    *D
    for Bank 1 Sensor 2
    V100136
    Front
    V100137
    Upper Side
    V100138
    Rear

  1. Connect the 4 sensor connectors.


2. INSTALL NO. 1 ENGINE COVER

3. INSTALL NO. 2 ENGINE COVER

4. INSTALL INTAKE MANIFOLD
(Click here)
← INSPECTION (from Sep 2011)INSTALLATION (from Jan 2012) →