INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. INSTALL KNOCK SENSOR |
![]() ![]() |
Install the 4 sensors with the 4 bolts so that the sensors are angled as shown in the illustration.
- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
- NOTICE:
- The acceptable installation angle of the sensor is between 10° upward and downward from the horizontal position.
Text in Illustration *A
for Bank 2 Sensor 1
*B
for Bank 1 Sensor 1
*C
for Bank 2 Sensor 2
*D
for Bank 1 Sensor 2


Front


Upper Side


Rear
Connect the 4 sensor connectors.
| 2. INSTALL NO. 1 ENGINE COVER |
| 3. INSTALL NO. 2 ENGINE COVER |
| 4. INSTALL INTAKE MANIFOLD |

