2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

OPERATION CHECK

Troubleshooting · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


ENTER DIAGNOSTIC MODE
  1. Enter diagnostic mode (Click here).


RSE CHECK

HINT:
  1. Use the remote control for each inspection.
  2. This mode checks the color display on the television display assembly.
  3. The television display assembly is not a touch panel type. Do not touch the screen.

  1. Color Bar Check

    1. E192456
      Select "Color Bar Check" from the "RSE Check" screen.

    2. E192460
      Select a color bar from the "Color Bar Check Mode" screen.

    3. Check the display color.

      HINT:
      1. The entire screen turns to the color or stripe which is selected.
      2. The screen returns to the "Color Bar Check" screen if the remote controller is operated again.

  2. Remote Commander Check

    1. E192457
      Select "Remote Commander Check" from the "RSE Check" screen.

    2. E192461
      Operate each switch and check that the switch name and condition are correctly displayed.

  3. Auto Open/Close Check

    1. E192458
      Select "Auto Open/Close Check" from the "RSE Check" screen.

    2. E192459
      Confirm the number of open/close cycles of the television display assembly.

      HINT:
      The counter indicates the number of times the television display assembly has been opened to an angle of 90° or greater.

← HOW TO PROCEED WITH TROUBLESHOOTING (from Jan 2012)OPERATION CHECK (from Jan 2012) →