2011-2013 Land Cruiser · Service Manual Vehicle Exterior

TERMINALS OF ECU

System information · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)
C172609E03
  1. Disconnect the E1, E2, E3, 2A, 2C, and 2D ECU connectors.

  2. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    2A-1 (ACC) - Body ground
    B - Body ground
    ACC power supply
    Always
    11 to 14 V
    2A-1 (IG) - Body ground
    B - Body ground
    IG power supply
    Always
    11 to 14 V
    2A-1 (TRLY) - Body ground
    B - Body ground
    Taillight power supply
    Always
    11 to 14 V
    2D-62 (GND2) - Body ground
    W-B - Body ground
    Body ground
    Always
    Below 1 Ω
    E3-1 (GND3) - Body ground
    BR - Body ground
    Body ground
    Always
    Below 1 Ω
    E1-24 (DCTY) - Body ground*1
    L - Body ground
    Front door courtesy light switch LH signal
    Front door LH open
    Below 1 Ω
    E1-24 (DCTY) - Body ground*1
    L - Body ground
    Front door courtesy light switch LH signal
    Front door LH closed
    10 kΩ or higher
    E1-24 (DCTY) - Body ground*2
    Y - Body ground
    Front door courtesy light switch LH signal
    Front door LH open
    Below 1 Ω
    E1-24 (DCTY) - Body ground*2
    Y - Body ground
    Front door courtesy light switch LH signal
    Front door LH closed
    10 kΩ or higher
    E2-21 (PCTY) - Body ground*1
    Y - Body ground
    Front door courtesy light switch RH signal
    Front door RH open
    Below 1 Ω
    E2-21 (PCTY) - Body ground*1
    Y - Body ground
    Front door courtesy light switch RH signal
    Front door RH closed
    10 kΩ or higher
    E2-21 (PCTY) - Body ground*2
    L - Body ground
    Front door courtesy light switch RH signal
    Front door RH open
    Below 1 Ω
    E2-21 (PCTY) - Body ground*2
    L - Body ground
    Front door courtesy light switch RH signal
    Front door RH closed
    10 kΩ or higher
    2C-2 (LCTY) - Body ground
    W - Body ground
    Rear door courtesy light switch LH signal
    Rear door LH open
    Below 1 Ω
    2C-2 (LCTY) - Body ground
    W - Body ground
    Rear door courtesy light switch LH signal
    Rear door LH closed
    10 kΩ or higher
    E2-7 (RRCY) - Body ground
    G - Body ground
    Rear door courtesy light switch RH signal
    Rear door RH open
    Below 1 Ω
    E2-7 (RRCY) - Body ground
    G - Body ground
    Rear door courtesy light switch RH signal
    Rear door RH closed
    10 kΩ or higher
    E2-25 (BCTY) - Body ground
    W - Body ground
    Back door courtesy light switch signal
    Back door open
    Below 1 Ω
    E2-25 (BCTY) - Body ground
    W - Body ground
    Back door courtesy light switch signal
    Back door closed
    10 kΩ or higher
    E1-23 (TAIL) - Body ground
    V - Body ground
    Light control switch TAIL signal
    Light control switch tail
    Below 1 Ω
    E1-23 (TAIL) - Body ground
    V - Body ground
    Light control switch TAIL signal
    Light control switch except tail
    10 kΩ or higher
    E2-17 (HEAD) - Body ground
    R- Body ground
    Light control switch HEAD signal
    Light control switch head
    Below 1 Ω
    E2-17 (HEAD) - Body ground
    R - Body ground
    Light control switch HEAD signal
    Light control switch except head
    10 kΩ or higher
    E1-21 (A) - Body ground
    G - Body ground
    Light control switch AUTO signal
    Light control switch auto
    Below 1 Ω
    E1-21 (A) - Body ground
    G - Body ground
    Light control switch AUTO signal
    Light control switch except auto
    10 kΩ or higher
    E2-28 (FFOG) - Body ground
    R - Body ground
    Front fog light switch signal
    Front fog light switch on
    Below 1 Ω
    E2-28 (FFOG) - Body ground
    R - Body ground
    Front fog light switch signal
    Front fog light switch off
    10 kΩ or higher
    E2-9 (RFOG) - Body ground
    R - Body ground
    Rear fog light switch signal
    Rear fog light switch on
    Below 1 Ω
    E2-9 (RFOG) - Body ground
    R - Body ground
    Rear fog light switch signal
    Rear fog light switch off
    10 kΩ or higher
    2D-13 (HU) - Body ground
    R - Body ground
    Dimmer switch high signal
    Dimmer switch high
    Below 1 Ω
    2D-13 (HU) - Body ground
    R - Body ground
    Dimmer switch high signal
    Dimmer switch except high or flash
    10 kΩ or higher
    E1-13 (HF) - Body ground
    R - Body ground
    Dimmer switch flash signal
    Dimmer switch flash
    Below 1 Ω
    E1-13 (HF) - Body ground
    R - Body ground
    Dimmer switch flash signal
    Dimmer switch except flash
    10 kΩ or higher
    2D-51 (ILE) - Body ground
    G - Body ground
    Interior light signal
    Map light on
    Below 1 Ω
    2D-51 (ILE) - Body ground
    G - Body ground
    Interior light signal
    Map light off
    10 kΩ or higher
    2B-22 (STOP) - Body ground
    R - Body ground
    Stop light switch signal
    Brake pedal depressed
    Below 1 Ω
    2B-22 (STOP) - Body ground
    R - Body ground
    Stop light switch signal
    Brake pedal released
    10 kΩ or higher

    HINT:
    *1: for LHD
    *2: for RHD

    If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the E1, 2B and 2D ECU connectors.

  4. Measure the voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    E1-4 (FFGO) - Body ground
    R - Body ground
    Front fog light signal
    Light control switch tail,
    front fog light switch on
    Below 1 V
    E1-4 (FFGO) - Body ground
    R - Body ground
    Front fog light signal
    Light control switch tail,
    front fog light switch off
    11 to 14 V
    E3-14 (RFOG) - Body ground
    R - Body ground
    Rear fog light signal
    Light control switch tail,
    rear fog light switch off
    Below 1 V
    E3-14 (RFOG) - Body ground
    R - Body ground
    Rear fog light signal
    Light control switch tail,
    rear fog light switch off
    11 to 14 V
    2D-18 (HRLY) - Body ground
    L - Body ground
    Headlight low beam signal
    Light control switch head,
    dimmer switch low
    Below 1 V
    2D-18 (HRLY) - Body ground
    L - Body ground
    Headlight low beam signal
    Light control switch head,
    dimmer switch except low
    11 to 14 V
    2B-16 (DRL) - Body ground
    R-G - Body ground
    Headlight low beam signal
    Light control switch head,
    dimmer switch high
    Below 1 V
    2B-16 (DRL) - Body ground
    R-G - Body ground
    Headlight low beam signal
    Light control switch head,
    dimmer switch except high
    11 to 14 V
    If the result is not as specified, the ECU may have a malfunction.

← PROBLEM SYMPTOMS TABLE (from Jan 2012)TERMINALS OF ECU (from Jan 2012) →