INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. INSTALL VENTILATION VALVE SUB-ASSEMBLY |
Apply adhesive to 2 or 3 threads of the ventilation valve.

- Adhesive:
- Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Install the ventilation valve.
- Torque:
- 27 N*m{ 275 kgf*cm , 20 ft.*lbf }
Connect the ventilation hose to the valve.

Secure the hose with the clamp.
| 2. INSTALL INTAKE AIR SURGE TANK |
Install the intake air surge tank (Click here).
