2011-2013 Land Cruiser · Service Manual Vehicle Exterior

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Trouble Codes.

  5. Read the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Trouble Codes.

  5. Clear the DTCs.

← DTC CHECK / CLEAR (Sep 2011 – Dec 2011)FAIL-SAFE CHART (from Jan 2012) →