2011-2013 Land Cruiser · Service Manual Vehicle Exterior

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Main Body 
    Display
    Default
    Contents
    Setting
    Lighting Time
    15s
    To change the lighting time after closing the door. (It will quickly fade out in the case of turning the ignition switch to ON).
    7.5s/15s/30s
    I/L when ACC OFF
    ON
    Function to light the interior light when the ignition switch is turned from ON to off.
    ON/OFF
    I/L ON W/Door Key Unlock
    ON
    Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch.
    ON/OFF
    Room Light when Aprchd
    ON
    Dome light illumination (when approaching vehicle)
    ON/OFF
    Disp Ex ON Sen
    NORMAL
    Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*1
    LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
    Disp Ex OFF Sen
    NORMAL
    Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2
    LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
    Sensitivity
    NORMAL
    Function to adjust the ambient light sensitivity of the automatic light control system.*3
    LIGHT2/LIGHT1/NORMAL/DARK1/DARK2

    HINT:
    The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

    *1 
    System Setting
    E224788
    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    HINT:
    When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

    *2 
    System Setting
    E224788
    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    HINT:
    When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

    *3 
    System Setting
    E224788
    Setting
    DARK2
    DARK1
    NORMAL
    LIGHT1
    LIGHT2

    HINT:
    When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

← OPERATION CHECK (from Jan 2012)CUSTOMIZE PARAMETERS (from Jan 2012) →