CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
Main Body Display
Default
Contents
Setting
Lighting Time
15s
To change the lighting time after closing the door. (It will quickly fade out in the case of turning the ignition switch to ON).
7.5s/15s/30s
I/L when ACC OFF
ON
Function to light the interior light when the ignition switch is turned from ON to off.
ON/OFF
I/L ON W/Door Key Unlock
ON
Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch.
ON/OFF
Room Light when Aprchd
ON
Dome light illumination (when approaching vehicle)
ON/OFF
Disp Ex ON Sen
NORMAL
Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*1
LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
Disp Ex OFF Sen
NORMAL
Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2
LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
Sensitivity
NORMAL
Function to adjust the ambient light sensitivity of the automatic light control system.*3
LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
- HINT:
- The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
*1 System Setting


Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2
- HINT:
- When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.
*2 System Setting


Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2
- HINT:
- When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.
*3 System Setting


Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2
- HINT:
- When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.
| CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display) |
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
Turn the ignition switch to ON.
Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Light Settings.
Select the setting by referring to the table below.
Display
Default
Contents
Setting
Interior Lights Off Time
15 s
This function controls the interior lights.
OFF, 7.5 s, 15 s or 30 s
Light Sensor Sensitivity
0
(middle bar)
Adjusts the ambient light sensitivity of the automatic light control system.*
-2, -1, 0, +1 or +2
- HINT:
- The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
* System Setting


Setting
-2
-1
0
+1
+2
- HINT:
- When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.