B279C Theft Deterrent System Presence Detection
Diagnostic trouble codes · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
This code is stored when an ECM that is incompatible with the engine immobiliser system is installed to the vehicle.| DTC Code |
DTC Detection Condition |
Trouble Area |
DTC Output Confirmation Operation |
| B279C |
An ECM that is incompatible with the engine immobiliser system is installed (1 trip detection logic*). |
ECM |
Check for DTCs. |
- *: Only output while a malfunction is present.
| Vehicle Condition when Malfunction Detected |
Fail-safe Operation when Malfunction Detected |
| Engine cannot be started |
- |
| DTC Code |
Data List and Active Test |
| B279C |
- |
INSPECTION PROCEDURE
- NOTICE:
- After performing repairs, perform the operation that fulfills the DTC output confirmation operation, and then confirm that no DTCs are output again.
| 1. REPLACE CURRENT ECM WITH PROPER ECM |
Replace the current ECM with the proper ECM.
- HINT:
- for 1GR-FE (Click here)
- for 1VD-FTV (Click here)
- for 1GR-FE (Click here)
| NEXT | ||
| ||
