B279C Theft Deterrent System Presence Detection
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
This code is stored when an ECM that is incompatible with the engine immobiliser system is installed to the vehicle.
DTC Code
|
DTC Detection Condition
|
Trouble Area
|
DTC Output Confirmation Operation
|
B279C
|
An ECM that is incompatible with the engine immobiliser system is installed (1 trip detection logic*).
|
ECM
|
Check for DTCs.
|
- *: Only output while a malfunction is present.
Vehicle Condition and Fail-safe Operation when Malfunction Detected
Vehicle Condition when Malfunction Detected
|
Fail-safe Operation when Malfunction Detected
|
Engine cannot be started
|
-
|
Related Data List and Active Test
DTC Code
|
Data List and Active Test
|
B279C
|
-
|
INSPECTION PROCEDURE
- NOTICE:
- After performing repairs, perform the operation that fulfills the DTC output confirmation operation, and then confirm that no DTCs are output again.
| 1. REPLACE CURRENT ECM WITH PROPER ECM |
 |
Replace the current ECM with the proper ECM.
- HINT:
- for 1GR-FE (Click here)
- for 1VD-FTV (Click here)
| NEXT |
|
 |
|
|