2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for LHD)

B165798E04
  1. Check the operation of the lumbar support adjuster.

    1. Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2
      Hold
      Battery positive (+) → 2
      Battery negative (-) → 1
      Release

      If the result is not as specified, replace the lumbar support adjuster assembly.


INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (for RHD)

B190726E01
  1. Check the operation of the lumbar support adjuster.

    1. Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 2
      Battery negative (-) → 1
      Hold
      Battery positive (+) → 1
      Battery negative (-) → 2
      Release

      If the result is not as specified, replace the lumbar support adjuster assembly.

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →