2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


INSPECT FRONT SEATBACK HEATER ASSEMBLY LH (w/o Climate Control Seat System)

B298948E01
  1. Check the front seatback heater assembly LH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Front Seatback Heater Assembly LH:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Seatback heater temperature 25°C (77°F)
      7.4 to 8.8 Ω

      If the result is not as specified, replace the front seatback heater assembly LH.
      Text in Illustration 
      *a
      Component without harness connected
      (Front Seatback Heater Assembly LH)


INSPECT FRONT SEATBACK HEATER ASSEMBLY LH (w/ Climate Control Seat System)

B298948E01
  1. Check the front seatback heater assembly LH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Front Seatback Heater Assembly LH:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Seatback heater temperature 25°C (77°F)
      7.4 to 8.8 Ω

      If the result is not as specified, replace the front seatback heater assembly LH.
      Text in Illustration 
      *a
      Component without harness connected
      (Front Seatback Heater Assembly LH)


INSPECT FRONT SEATBACK HEATER ASSEMBLY RH (w/o Climate Control Seat System)

B298948E01
  1. Check the front seatback heater assembly RH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Front Seatback Heater Assembly RH:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Seatback heater temperature 25°C (77°F)
      7.4 to 8.8 Ω

      If the result is not as specified, replace the front seatback heater assembly RH.
      Text in Illustration 
      *a
      Component without harness connected
      (Front Seatback Heater Assembly RH)


INSPECT FRONT SEATBACK HEATER ASSEMBLY RH (w/ Climate Control Seat System)

B298948E01
  1. Check the front seatback heater assembly RH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Front Seatback Heater Assembly RH:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Seatback heater temperature 25°C (77°F)
      7.4 to 8.8 Ω

      If the result is not as specified, replace the front seatback heater assembly RH.
      Text in Illustration 
      *a
      Component without harness connected
      (Front Seatback Heater Assembly RH)

← INSPECTION (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →