2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT REAR SEAT CUSHION HEATER ASSEMBLY

B192650E01
  1. Heat the thermostat with a light.

  1. Check the seat cushion heater.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A-1 - B-1
      Seat cushion heater temperature 25°C (77°F)
      3.05 to 3.65 Ω
      A-4 - B-2
      A-1 - A-4
      A-2 - A-3
      8 to 12 kΩ

      If the result is not as specified, replace the seat cushion heater assembly.

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →