2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/o Climate Control Seat System)

B312451E01
  1. Check the front seat cushion heater assembly LH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Front Seat Cushion Heater Assembly LH:
      Tester Connection
      Condition
      Specified Condition
      A1 - A4
      A1 - B1
      A4 - B2
      B1 - B2
      Seat cushion heater temperature 25°C (77°F)
      2.5 to 3.0 Ω
      A2 - A3
      8 to 12 kΩ

    2. Heat the thermostat with a light.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Thermostat:
      Tester Connection
      Condition
      Specified Condition
      A1 - A4
      A1 - B1
      A1 - B2
      46 to 54°C or more
      10 kΩ or higher

      If the result is not as specified, replace the front seat cushion heater assembly LH.
      Text in Illustration 
      *1
      Thermostat
      *2
      Connector A
      *3
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater Assembly LH)


INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Climate Control Seat System)

B312452E01
  1. Check the front seat cushion heater assembly LH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Front Seat Cushion Heater Assembly LH:
      Tester Connection
      Condition
      Specified Condition
      A1 - A3
      A1 - B1
      A3 - B2
      B1 - B2
      Seat cushion heater temperature 25°C (77°F)
      2.5 to 3.0 Ω
      A2 - A3
      8 to 12 kΩ

    2. Heat the thermostat with a light.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Thermostat:
      Tester Connection
      Condition
      Specified Condition
      A1 - A3
      A1 - B1
      A1 - B2
      46 to 54°C or more
      10 kΩ or higher

      If the result is not as specified, replace the front seat cushion heater assembly LH.
      Text in Illustration 
      *1
      Thermostat
      *2
      Connector A
      *3
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater Assembly LH)


INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (w/o Climate Control Seat System)

B312451E01
  1. Check the front seat cushion heater assembly RH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Front Seat Cushion Heater Assembly RH:
      Tester Connection
      Condition
      Specified Condition
      A1 - A4
      A1 - B1
      A4 - B2
      B1 - B2
      Seat cushion heater temperature 25°C (77°F)
      2.5 to 3.0 Ω
      A2 - A3
      8 to 12 kΩ

    2. Heat the thermostat with a light.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Thermostat:
      Tester Connection
      Condition
      Specified Condition
      A1 - A4
      A1 - B1
      A1 - B2
      46 to 54°C or more
      10 kΩ or higher

      If the result is not as specified, replace the front seat cushion heater assembly RH.
      Text in Illustration 
      *1
      Thermostat
      *2
      Connector A
      *3
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater Assembly RH)


INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (w/ Climate Control Seat System)

B312452E01
  1. Check the front seat cushion heater assembly RH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Front Seat Cushion Heater Assembly RH:
      Tester Connection
      Condition
      Specified Condition
      A1 - A3
      A1 - B1
      A3 - B2
      B1 - B2
      Seat cushion heater temperature 25°C (77°F)
      2.5 to 3.0 Ω
      A2 - A3
      8 to 12 kΩ

    2. Heat the thermostat with a light.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Thermostat:
      Tester Connection
      Condition
      Specified Condition
      A1 - A3
      A1 - B1
      A1 - B2
      46 to 54°C or more
      10 kΩ or higher

      If the result is not as specified, replace the front seat cushion heater assembly RH.
      Text in Illustration 
      *1
      Thermostat
      *2
      Connector A
      *3
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater Assembly RH)

← INSPECTION (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →