2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)

  1. for Engine Hood Courtesy Switch Connector 2 Pin Type (for LHD Vehicle):

    B219990E02

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Unlock
      10 kΩ or higher
      1 - 2
      Lock
      Below 1 Ω

      If the result is not as specified, replace the hood lock assembly.

  1. for Engine Hood Courtesy Switch Connector 2 Pin Type (for RHD Vehicle):

    B219989E02

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Unlock
      10 kΩ or higher
      1 - 2
      Lock
      Below 1 Ω

      If the result is not as specified, replace the hood lock assembly.

  1. for Engine Hood Courtesy Switch Connector 4 Pin Type:

    B216369E03

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 3
      Always
      Below 1 Ω
      2 - 4
      Unlock
      10 kΩ or higher
      2 - 4
      Lock
      Below 1 Ω

      If the result is not as specified, replace the hood lock assembly.

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →