TERMINALS OF ECU
System information · Vehicles built from Sep 2011
| CHECK OUTER MIRROR CONTROL ECU |


for LHD:
Disconnect the I17 ECU connector.
Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
I17-9 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
I17-3 (B) - I17-9 (GND)
R - W-B
Battery (ECU power source)
Always
11 to 14 V
I17-4 (ACC) - I17-9 (GND)
GR - W-B
ACC power supply
Engine switch off
Below 1 V
Engine switch on (ACC)
11 to 14 V
Reconnect the I17 ECU connector.
Measure the voltage of the connector.
If the result is not as specified, the ECU may have a malfunction.Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
I17-1 (RL) - I17-9 (GND)
LG - W-B
Mirror retract motor output (retracting)
Mirror retract switch on (Outer rear view mirror LH retracting)
10.3 to 14 V
I17-2 (FL) - I17-9 (GND)
SB - W-B
Mirror retract motor output (returning)
Mirror retract switch off (Outer rear view mirror LH returning)
10.3 to 14 V
I17-5 (RR) - I17-9 (GND)
BR - W-B
Mirror retract motor output (retracting)
Mirror retract switch on (Outer rear view mirror RH retracting)
10.3 to 14 V
I17-6 (FR) - I17-9 (GND)
R - W-B
Mirror retract motor output (returning)
Mirror retract switch off (Outer rear view mirror RH returning)
10.3 to 14 V
I18-18 (M+L) - I17-9 (GND)
Y - W-B
Mirror motor output
Mirror master switch L, Mirror control switch off
Below 1 V
Mirror master switch L, Mirror control switch up or left
Below 1 V
Mirror master switch L, Mirror control switch down or right
10 to 14 V
I18-19 (MHL) - I17-9 (GND)
G - W-B
Mirror motor output
Mirror master switch L, Mirror control switch off
Below 1 V
Mirror master switch L, Mirror control switch right
Below 1 V
Mirror master switch L, Mirror control switch left
10 to 14 V
I18-20 (MVL) - I17-9 (GND)
L - W-B
Mirror motor output
Mirror master switch L, Mirror control switch off
Below 1 V
Mirror master switch L, Mirror control switch down
Below 1 V
Mirror master switch L, Mirror control switch up
10 to 14 V
I18-38 (M+R) - I17-9 (GND)
Y - W-B
Mirror motor output
Mirror master switch R, Mirror control switch off
Below 1 V
Mirror master switch R, Mirror control switch up or left
Below 1 V
Mirror master switch R, Mirror control switch down or right
10 to 14 V
I18-39 (MHR) - I17-9 (GND)
G - W-B
Mirror motor output
Mirror master switch R, Mirror control switch off
Below 1 V
Mirror master switch R, Mirror control switch right
Below 1 V
Mirror master switch R, Mirror control switch left
10 to 14 V
I18-40 (MVR) - I17-9 (GND)
R - W-B
Mirror motor output
Mirror master switch R, Mirror control switch off
Below 1 V
Mirror master switch R, Mirror control switch down
Below 1 V
Mirror master switch R, Mirror control switch up
10 to 14 V
I18-4 (VSR) - I18-3 (LE1)
GR - BR
Vertical direction position signal
Mirror master switch R or L
Mirror control switch up or down
Voltage fluctuates between 0 and 5 V
I18-5 (HSRL) - I18-3 (LE1)
L - BR
Horizontal direction position signal
Mirror master switch R or L
Mirror control switch right or left
Voltage fluctuates between 0 and 5 V
I18-2 (LVC) - I18-3 (LE1)
B - BR
Power source for mirror position sensor
Engine switch off during sleep mode
Below 1 V
Engine switch on (IG)
4.7 to 5.5 V
I18-24 (VSRR) - I18-23 (RE1)
GR - BR
Vertical direction position signal
Mirror master switch R or L
Mirror control switch up or down
Voltage fluctuates between 0 and 5 V
I18-25 (HSRR) - I18-23 (RE1)
W - BR
Horizontal direction position signal
Mirror master switch R or L
Mirror control switch right or left
Voltage fluctuates between 0 and 5 V
I18-22 (RVC) - I18-23 (RE1)
B - BR
Power source for mirror position sensor
Engine switch off during sleep mode
Below 1 V
Engine switch on (IG)
4.7 to 5.5 V
for RHD:
Disconnect the I23 ECU connector.
Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
I23-9 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
I23-3 (B) - I17-9 (GND)
R - W-B
Battery (ECU power source)
Always
11 to 14 V
I23-4 (ACC) - I17-9 (GND)
GR - W-B
ACC power supply
Engine switch off
Below 1 V
Engine switch on (ACC)
11 to 14 V
Reconnect the I23 ECU connector.
Measure the voltage of the connector.
If the result is not as specified, the ECU may have a malfunction.Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
I23-1 (RL) - I23-9 (GND)
BR - W-B
Mirror retract motor output (retracting)
Mirror retract switch on (Outer rear view mirror LH retracting)
10.3 to 14 V
I23-2 (FL) - I23-9 (GND)
R - W-B
Mirror retract motor output (returning)
Mirror retract switch off (Outer rear view mirror LH returning)
10.3 to 14 V
I23-5 (RR) - I23-9 (GND)
LG - W-B
Mirror retract motor output (retracting)
Mirror retract switch on (Outer rear view mirror RH retracting)
10.3 to 14 V
I23-6 (FR) - I23-9 (GND)
SB - W-B
Mirror retract motor output (returning)
Mirror retract switch off (Outer rear view mirror RH returning)
10.3 to 14 V
I24-18 (M+L) - I23-9 (GND)
Y - W-B
Mirror motor output
Mirror master switch L, Mirror control switch off
Below 1 V
Mirror master switch L, Mirror control switch up or left
Below 1 V
Mirror master switch L, Mirror control switch down or right
10 to 14 V
I24-19 (MHL) - I23-9 (GND)
G - W-B
Mirror motor output
Mirror master switch L, Mirror control switch off
Below 1 V
Mirror master switch L, Mirror control switch right
Below 1 V
Mirror master switch L, Mirror control switch left
10 to 14 V
I24-20 (MVL) - I23-9 (GND)
R - W-B
Mirror motor output
Mirror master switch L, Mirror control switch off
Below 1 V
Mirror master switch L, Mirror control switch down
Below 1 V
Mirror master switch L, Mirror control switch up
10 to 14 V
I24-38 (M+R) - I23-9 (GND)
Y - W-B
Mirror motor output
Mirror master switch R, Mirror control switch off
Below 1 V
Mirror master switch R, Mirror control switch up or left
Below 1 V
Mirror master switch R, Mirror control switch down or right
10 to 14 V
I24-39 (MHR) - I23-9 (GND)
G - W-B
Mirror motor output
Mirror master switch R, Mirror control switch off
Below 1 V
Mirror master switch R, Mirror control switch right
Below 1 V
Mirror master switch R, Mirror control switch left
10 to 14 V
I24-40 (MVR) - I23-9 (GND)
L - W-B
Mirror motor output
Mirror master switch R, Mirror control switch off
Below 1 V
Mirror master switch R, Mirror control switch down
Below 1 V
Mirror master switch R, Mirror control switch up
10 to 14 V
I24-4 (VSR) - I24-3 (LE1)
GR - BR
Vertical direction position signal
Mirror master switch R or L
Mirror control switch up or down
Voltage fluctuates between 0 and 5 V
I24-5 (HSRL) - I24-3 (LE1)
W - BR
Horizontal direction position signal
Mirror master switch R or L
Mirror control switch right or left
Voltage fluctuates between 0 and 5 V
I24-2 (LVC) - I24-3 (LE1)
B - BR
Power source for mirror position sensor
Engine switch off during sleep mode
Below 1 V
Engine switch on (IG)
4.7 to 5.5 V
I24-24 (VSRR) - I24-23 (RE1)
GR - BR
Vertical direction position signal
Mirror master switch R or L
Mirror control switch up or down
Voltage fluctuates between 0 and 5 V
I24-25 (HSRR) - I24-23 (RE1)
L - BR
Horizontal direction position signal
Mirror master switch R or L
Mirror control switch right or left
Voltage fluctuates between 0 and 5 V
I24-22 (RVC) - I24-23 (RE1)
B - BR
Power source for mirror position sensor
Engine switch off during sleep mode
Below 1 V
Engine switch on (IG)
4.7 to 5.5 V
| CHECK MAIN BODY ECU |


Disconnect the 2B, 2A and 2D ECU connectors.
Measure the voltage and resistance of the wire harness side connectors.
If the result is not as specified, there may be a malfunction on the wire harness side.Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
2B-20 (BATB) - Body ground
L - Body ground
BATB power supply
Always
11 to 14 V
2A-1 (ACC) - Body ground
B - Body ground
ACC power supply
Always
11 to 14 V
2A-1 (IG) - Body ground
B - Body ground
IG power supply
Always
11 to 14 V
2D-62 (GND2) - Body ground
W-B - Body ground
Body ground
Always
Below 1 Ω
Reconnect the 2B, 2A and 2D ECU connectors.
Measure the voltage of the connectors.
If the result is not as specified, the ECU may have a malfunction.Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
E2-6 (RET) - 2D-62 (GND2)
BR - W-B
Mirror retract motor output (retracting)
Mirror retract switch on
11 to 14 V
E2-6 (RET) - 2D-62 (GND2)
BR - W-B
Mirror retract motor output (returning)
Mirror retract switch off
Below 1 V
E1-12 (MIRS) - E1-2 (MIRE)
LG - BR
Mirror motor output
Mirror master switch L
11 to 14 V
Mirror master switch R
11 to 14 V
Mirror master switch off
Below 1 V
E1-11 (MIRB) - E1-2 (MIRE)
GR - BR
Mirror motor output
Mirror master switch L, Mirror control switch right
11 to 14 V
Mirror master switch L, Mirror control switch left
11 to 14 V
Mirror master switch L, Mirror control switch down
11 to 14 V
Mirror master switch L, Mirror control switch up
11 to 14 V
Mirror master switch R, Mirror control switch right
11 to 14 V
Mirror master switch R, Mirror control switch left
11 to 14 V
Mirror master switch R, Mirror control switch down
11 to 14 V
Mirror master switch R, Mirror control switch up
11 to 14 V
Mirror master switch off
Below 1 V