2011-2013 Land Cruiser · Service Manual Drivetrain

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

C172422E01

2. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

C158363E01
  1. Using a thin-bladed screwdriver, release the connector housing retainer.

  1. Using a thin-bladed screwdriver, pull out the 4 (ILL+) and 8 (ILL-) terminals from the rear as shown in the illustration.

  1. C171530E01
    Rotate the indicator light wire counterclockwise to align the key part and remove the wire.


3. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

C171524
  1. Detach the 4 claws and remove the position indicator housing from the floor shift.


4. REMOVE POSITION INDICATOR LENS

C172418
  1. Detach the 4 claws and remove the position indicator lens from the floor shift.


5. REMOVE POSITION INDICATOR SLIDE COVER AND NO. 2 POSITION INDICATOR SLIDE COVER

C172423
  1. Remove the position indicator slide cover with No. 2 position indicator slide cover.

  1. Remove the No. 2 position indicator slide cover from the position indicator slide cover.


6. REMOVE SHIFT LOCK RELEASE BUTTON

C172424
  1. Detach the 2 claws and remove the button and spring.


7. REMOVE LOWER POSITION INDICATOR HOUSING

C171528
  1. Using a small screwdriver, detach the 6 claws and remove the housing.


8. REMOVE SHIFT LOCK CONTROL ECU

C171529
  1. Disconnect the shift lock solenoid connector.

  1. Detach the 3 claws and remove the ECU.

← REMOVAL (from Sep 2011)INSPECTION (from Sep 2011) →