2011-2013 Land Cruiser · Service Manual Drivetrain

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT TRANSMISSION CONTROL SWITCH

C146679E07
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 (IG) - 7 (S)
    Shift lever in S, "+" or "-"
    Below 1 Ω
    2 (SFTU) - 5 (E)
    Shift lever held in "+" (Up-shift)
    1 (SFTD) - 5 (E)
    Shift lever held in "-" (Down-shift)
    3 (IG) - 7 (S)
    Shift lever not in S, "+" or "-"
    10 kΩ or higher
    2 (SFTU) - 5 (E)
    Shift lever in S
    1 (SFTD) - 5 (E)

    If the result is not as specified, replace the transmission floor shift assembly.

← DISASSEMBLY (from Sep 2011)REASSEMBLY (from Sep 2011) →