2011-2013 Land Cruiser · Service Manual Vehicle Exterior

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


GENERAL
The windshield deicer system thin heater wires are attached to the inside of the windshield glass and deice the windshield surface quickly. The indicator light illuminates while the system is operating. The system automatically turns off after approximately 15 minutes.

FUNCTION OF MAIN COMPONENT
Component
Outline
Deicer switch
Located on the air conditioning control assembly*1 or multi-display assembly*2, it detects deicer switch operation and transmits signals to the air conditioning amplifier assembly through the LIN communication line*1 or CAN communication line and UART communication line*2.
Deicer relay
Receives windshield deicer activation request signals from the air conditioning amplifier assembly and supplies power to the windshield deicer.
Windshield deicer
Receives power from the deicer relay and heats the windshield deicer wire.

HINT:
*1: w/o Navigation System
*2: w/ Navigation System


DESCRIPTION
Function
Outline
Deice front window surface
  1. The deicer relay receives windshield deicer activation request signals from the air conditioning amplifier assembly and supplies power to the windshield deicer.
  1. Receives power from the deicer relay and heats the windshield deicer wire.
← SYSTEM DESCRIPTION (Sep 2011 – Dec 2011)HOW TO PROCEED WITH TROUBLESHOOTING (Sep 2011 – Dec 2011) →