Removal / installation · Vehicles built from Sep 2011
1.
INSTALL PURGE VSV
Install the purge VSV with the bolt.
Torque:
21 N*m{
214 kgf*cm
, 15 ft.*lbf
}
Connect the purge VSV connector.
Text in Illustration
*a
Upper
2.
CONNECT PURGE LINE HOSE
Connect the 2 purge line hoses.
HINT:
Turn the claw of the clip to the upper side.
3.
INSTALL V-BANK COVER SUB-ASSEMBLY
Attach the 2 V-bank cover hooks to the bracket. Then align the 3 V-bank cover grommets with the 3 pins, and press down on the V-bank cover to attach the pins.