INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedure for LHD and RHD vehicles.
- The procedures listed below is for LHD vehicles.
- Use the same procedure for LHD and RHD vehicles.
| 1. INSTALL HOOD LOCK ASSEMBLY |
Apply MP grease to the sliding areas of the lock.

Connect the hood lock control cable.

Connect the connector.

Install the hood lock with the 2 bolts and nut.
- Torque:
- 5.5 N*m{ 57 kgf*cm , 49 in.*lbf }
Install a new hood lock nut cap.
| 2. INSTALL HOOD LOCK CONTROL CABLE COVER |
![]() ![]() |
Attach the claw to install the cover.
Install the 3 screws.
| 3. INSTALL RADIATOR GRILLE |
w/ Wide View Front Monitor System:
Connect the connector.
Attach the 2 clips and 8 claws to install the radiator grille assembly.
Install the 3 screws.
| 4. INSTALL UPPER RADIATOR SUPPORT SEAL |

