INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. INSTALL REAR NO. 2 SEAT ASSEMBLY |
![]() ![]() |
Temporarily install the rear No. 2 seat with the 4 bolts.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{ 377 kgf*cm , 27 ft.*lbf }
| 2. INSTALL REAR SIDE SEAT LEG PROTECTOR LH |
![]() ![]() |
Attach the 2 claws to install the protector.



