2011-2013 Land Cruiser · Service Manual Vehicle Interior

REASSEMBLY

Removal / installation · Vehicles built from Sep 2011

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR SIDE SEATBACK PAD LH

B189134E01
  1. Using hog ring pliers, install the seatback pad with new hog rings.


2. INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY

B182653
  1. Install the seat band with the screw.


3. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH

B189133E01
  1. Install the seatback cover.

  1. Pull out the seat band.

  1. Using hog ring pliers, install new hog rings to the seatback cover.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.


4. INSTALL REAR SIDE SEAT CUSHION PAD LH

5. INSTALL REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH
  1. Install the seat cushion cover.

  1. B189132
    Close the 2 fasteners, and then close the cushion cover.

  1. B189131E01
    Using hog ring pliers, install new hog rings to the seat cushion cover.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.


6. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
  1. Install the spring to the seat cushion leg.

  1. Install the seat cushion leg.

  1. B189130
    Install the 2 seat leg plates.

  1. B189129
    Install the 2 hinge pins and 2 new E-rings.

← DISASSEMBLY (from Sep 2011)INSTALLATION (from Sep 2011) →