2011-2013 Land Cruiser · Service Manual Vehicle Interior

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR SEAT CUSHION LEG SUB-ASSEMBLY

B182648
  1. Using a screwdriver, remove the 2 E-rings.

  1. Remove the 2 hinge pins.

  1. B182649
    Remove the 2 seat leg plates.

  1. Remove the seat cushion leg with the spring.

  1. Remove the spring from the seat cushion leg.


2. REMOVE REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH

B182650
  1. Remove the hog rings.

  1. B182651
    Open the 2 fasteners, and then remove the seat cushion cover.


3. REMOVE REAR SIDE SEAT CUSHION PAD LH

4. REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH

B182652
  1. Remove the hog rings.

  1. Pass the side seat band into the seatback cover.

  1. Remove the seatback cover.


5. REMOVE REAR SIDE SEAT BAND SUB-ASSEMBLY

B182653
  1. Remove the screw and seat band.


6. REMOVE REAR SIDE SEATBACK PAD LH

B182654
  1. Remove the hog rings and seatback pad.

← REMOVAL (from Sep 2011)REASSEMBLY (from Sep 2011) →