2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Sep 2011


1. REMOVE COMMON RAIL ASSEMBLY LH AND RH
  1. Remove the common rail assembly LH and RH (Click here).


2. REMOVE NO. 1 INTAKE MANIFOLD INSULATOR (w/ Intercooler)

A174795

3. REMOVE NO. 2 INTAKE MANIFOLD INSULATOR (w/ Intercooler)

A174791

4. REMOVE INTAKE PIPE

  1. A174796
    w/ EGR System:
    Remove the 2 nuts, 6 bolts, intake pipe and 2 gaskets.

  1. A180252
    w/o EGR System:
    Remove the 2 nuts, 4 bolts, intake pipe and gasket.


5. DISCONNECT NO. 2 ENGINE WIRE

  1. A174797
    Remove the 3 bolts and using a clip remover, detach the 2 wire harness clamps, and then disconnect the No. 2 engine wire.


6. REMOVE NO. 3 INTAKE MANIFOLD

  1. A174798
    Remove the 16 bolts, No. 3 intake manifold and 2 gaskets.


7. REMOVE INTAKE MANIFOLD INSULATOR (w/ EGR System)

A174799

8. REMOVE EGR PIPE INSULATOR (w/ EGR System)

  1. A174800
    Remove the 2 bolts and EGR pipe insulator.


9. REMOVE EGR VALVE ASSEMBLY WITH EGR COOLER (w/ EGR System)

  1. A174801
    Remove the 10 bolts, EGR valve with EGR cooler and 2 gaskets.

  1. A174802
    Disconnect the No. 5 water by-pass hose from the water by-pass outlet.


10. REMOVE EGR COOLER INSULATOR (w/ EGR System)

A174803

11. REMOVE NO. 3 NOZZLE LEAKAGE PIPE

  1. A174804
    Disconnect the No. 1 fuel hose from the fuel cooler.

  1. Remove the union bolt, bolt, No. 3 nozzle leakage pipe and gasket.

    NOTICE:
    After removing the nozzle leakage pipe, to prevent dirt or foreign objects from entering the nozzle leakage pipe, cover the nozzle leakage pipe ends with plastic bags.


12. REMOVE NO. 4 NOZZLE LEAKAGE PIPE

  1. A174805
    Disconnect the No. 2 fuel hose from the fuel cooler.

  1. Remove the union bolt, bolt, No. 4 nozzle leakage pipe and gasket.

    NOTICE:
    After removing the nozzle leakage pipe, to prevent dirt or foreign objects from entering the nozzle leakage pipe, cover the nozzle leakage pipe ends with plastic bags.


13. DISCONNECT NO. 6 WATER BY-PASS HOSE

A174806

14. DISCONNECT NO. 3 FUEL HOSE

  1. A176377
    Disconnect the fuel hose from the fuel cooler.


15. REMOVE FUEL COOLER ASSEMBLY

  1. A176378
    Remove the 2 bolts and fuel cooler.


16. DISCONNECT NO. 7 WATER BY-PASS HOSE

  1. A164182
    Disconnect the water by-pass hose from the fuel cooler.

← COMPONENTS (from Sep 2011)INSTALLATION (from Sep 2011) →