2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT CRANKSHAFT POSITION SENSOR

A163527E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (NE+) - 2 (NE-)
    Hot
    1630 to 2740 Ω
    Cold
    2065 to 3225 Ω

    NOTICE:
    In the table above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

    If the result is not as specified, replace the sensor.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →