INSTALLATION
Removal / installation · Vehicles built from Jan 2012
| 1.
INSTALL FRONT CRANKSHAFT OIL SEAL |
 |
Apply MP grease to the lip of a new front crankshaft oil seal.
- NOTICE:
- Do not allow foreign matter to contact the lip of the oil seal.
- Do not allow MP grease to contact the dust seal.
- Using SST and a hammer, tap in the front crankshaft oil seal to a depth between 0 and 1.0 mm (0 to 0.0394 in.) from the timing chain cover edge.
- SST
- 09223-22010
09506-35010
- NOTICE:
- Keep the lip free from foreign matter.
- Do not tap the front crankshaft oil seal at an angle.
| 2.
INSTALL CRANKSHAFT TIMING GEAR KEY |
 |
Install the crankshaft timing gear key to the crankshaft.
| 3.
INSTALL CRANKSHAFT PULLEY
|
 |
Align the key groove of the pulley with the pulley set key, and slide on the pulley to install it.
- Using SST, install the pulley set bolt.
- SST
- 09213-70011
09330-00021
-
Torque:
- 300 N*m{
3059 kgf*cm
, 221 ft.*lbf
}
Text in Illustration
*a
|
Hold
|
 
|
Turn
|
| 4.
INSTALL RADIATOR ASSEMBLY |
 |
(Click here)