2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012


1. REMOVE RADIATOR ASSEMBLY
(Click here)

2. REMOVE CRANKSHAFT PULLEY

  1. A164228E03
    Using SST, remove the crankshaft pulley set bolt.
    SST
    09213-70011  
    09330-00021  
    Text in Illustration 
    *a
    Hold
    V100135
    Turn

  1. Temporarily install the pulley set bolt to the crankshaft until 2 or 3 threads are engaged.

  1. A164229E02
    Using the pulley set bolt and SST, remove the crankshaft pulley.
    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05010, 09954-05011)
    Text in Illustration 
    *a
    Hold
    V100135
    Turn


3. REMOVE CRANKSHAFT TIMING GEAR KEY

  1. A218841
    Remove the crankshaft timing gear key from the crankshaft.


4. REMOVE FRONT CRANKSHAFT OIL SEAL

  1. A218840E01
    Using a screwdriver, pry out the front crankshaft oil seal.
    Text in Illustration 
    *1
    Protective Tape

    NOTICE:
    Do not damage the surface of the front crankshaft oil seal press fit hole or crankshaft.

    HINT:
    Tape the screwdriver tip before use.

← COMPONENTS (from Jan 2012)INSTALLATION (from Jan 2012) →