2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Sep 2011


CHECK MASS AIR FLOW METER

  1. Check the mass air flow value.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester main switch on.

    4. Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / mass air flow meter.

    5. A165593E01
      Blow air into the mass air flow meter, and check that the mass air flow meter value fluctuates.
      If the result is not as specified, check the mass air flow meter (Click here), or wiring and ECM (Click here).

← COMPONENTS (from Sep 2011)REMOVAL (from Sep 2011) →