2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSTALLATION

Removal / installation · Vehicles built from Sep 2011


1. INSTALL ACCELERATOR PEDAL ASSEMBLY

NOTICE:
  1. Avoid physical shocks to the accelerator pedal assembly.
  2. Do not disassemble the accelerator pedal assembly.
  3. Do not apply oil or lubricant to the accelerator pedal assembly.
    If it is applied, the accelerator pedal assembly may not move smoothly.

  1. Install the accelerator pedal assembly with the 2 nuts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the accelerator pedal position sensor connector.


2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

B182553
  1. Connect the connectors.

  1. Attach the 3 claws to install the No. 1 instrument panel under cover.

  1. Install the 2 screws.

← REMOVAL (from Sep 2011)COMPONENTS (from Sep 2011) →