2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Sep 2011


1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

B180655
  1. Remove the 2 screws.

  1. Detach the 3 claws.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover.


2. REMOVE ACCELERATOR PEDAL ASSEMBLY

NOTICE:
Do not apply oil or lubricant to the accelerator pedal assembly.
If it is applied, the accelerator pedal assembly may not move smoothly.

  1. A168892E01
    Disconnect the accelerator pedal position sensor connector.

  1. Remove the 2 nuts and accelerator pedal assembly.

← ON-VEHICLE INSPECTION (from Sep 2011)INSTALLATION (from Sep 2011) →