ON-VEHICLE INSPECTION
Inspection · Vehicles built from Sep 2011
| INSPECT ACCELERATOR PEDAL ASSEMBLY |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester main switch on.
Enter the following menus: Powertrain / Engine and ECT / Data List / ETCS / Accelerator Position No. 1 and Accelerator Position No. 2.
Read the value displayed on the intelligent tester.
- Standard Value:
Tester Display
Condition
Specified Condition
Accel Sens. No.1 Volt %
Released
10 to 22%
Depressed
52 to 90%
Accel Sens. No.2 Volt %
Released
24 to 40%
Depressed
68 to 99%
