2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012


1. REMOVE V-BANK COVER SUB-ASSEMBLY

  1. A274415E01
    Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
    Text in Illustration 
    *1
    Grommet
    *2
    Pin
    *3
    Hook
    *4
    Bracket


2. REMOVE AIR CLEANER CAP AND HOSE

  1. A272589
    Disconnect the No. 2 PCV hose and No. 1 air hose.

  1. Disconnect the mass air flow meter connector and detach the clamp.

  1. Detach the 4 clamps.

  1. Loosen the hose clamp and remove the air cleaner cap and hose.


3. REMOVE CAMSHAFT POSITION SENSOR

  1. A230353
    Disconnect the camshaft position sensor connector.

  1. Remove the bolt and camshaft position sensor.


4. REMOVE VVT SENSOR

  1. A158607E05
    Disconnect the 4 VVT sensor connectors.
    Text in Illustration 
    *A
    for Bank 2
    *B
    for Bank 1

  1. Remove the 4 bolts and 4 VVT sensors.

← COMPONENTS (from Jan 2012)INSTALLATION (from Jan 2012) →