2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built Sep 2011 – Dec 2011


INSPECT ENGINE OIL LEVEL SENSOR

  1. A167081E01
    Partially immerse the sensor in an oil bath and warm up the oil bath.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    ON, 20°C (68°F)
    Below 1 Ω
    OFF, 20°C (68°F)
    Below 1 Ω
    ON, 60°C (140°F)
    Below 1 Ω
    OFF, 60°C (140°F)
    10 kΩ or higher

    If the result is not as specified, replace the engine oil level sensor.

← REMOVAL (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →