INSTALLATION
Removal / installation · Vehicles built from Sep 2011
| 1. INSTALL WINCH MAIN RELAY |
Install the relay with the 3 nuts.
- Torque:
- 9.3 N*m{ 95 kgf*cm , 83 in.*lbf }
Connect the 2 wires with the 2 nuts.
- Torque:
- 9.4 N*m{ 96 kgf*cm , 84 in.*lbf }
Connect the connector.


| 2. INSTALL UPPER RADIATOR SUPPORT SEAL |
for Gasoline Engine:
Install the upper radiator support seal (Click here).
for Diesel Engine:
Install the upper radiator support seal (Click here).
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
