2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT WINCH MAIN RELAY

B167956
  1. Push in the plunger and release it. Check that it returns quickly to its original position.

  1. B189185E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A - B
    Battery voltage is not applied to terminals 1 and 2
    10 MΩ or higher
    Battery voltage is applied to terminals 1 and 2
    Below 1 Ω

    If the result is not as specified, replace the winch main relay.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →