REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE UPPER RADIATOR SUPPORT SEAL |
for Gasoline Engine:
Remove the upper radiator support seal (Click here).
for Diesel Engine:
Remove the upper radiator support seal (Click here).
| 3. REMOVE WINCH MAIN RELAY |
Disconnect the connector.
Remove the 2 nuts and disconnect the 2 wires.
Remove the 3 nuts and relay.


