2011-2013 Land Cruiser · Service Manual Drivetrain

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. REMOVE CLUTCH RESERVOIR GROMMET

C173221
  1. Fix the master cylinder in a vise.

  1. Using a pin punch and hammer, tap out the slotted spring pin.

  1. Remove the inlet union and grommet.


2. REMOVE CLUTCH MASTER CYLINDER PUSH ROD

C173220
  1. Loosen the lock nut, and then remove the clevis.

  1. Remove the lock nut from the push rod.

  1. Remove the boot.

  1. Using snap ring pliers, remove the snap ring and plate.

  1. Remove the push rod.


3. REMOVE PISTON AND SPRING
  1. Remove the piston and spring from the master cylinder.

← REMOVAL (from Sep 2011)REASSEMBLY (from Sep 2011) →