2011-2013 Land Cruiser · Service Manual Drivetrain

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. REMOVE CYLINDER PUSH ROD CLEVIS SUB-ASSEMBLY

  1. C227900
    Secure the master cylinder in a vise.

  1. Loosen the lock nut, and then remove the cylinder push rod clevis sub-assembly.

  1. Remove the lock nut from the clutch master cylinder push rod.


2. REMOVE CLUTCH MASTER CYLINDER PUSH ROD

  1. C227901
    Using snap ring pliers, remove the snap ring and plate while pushing in the clutch master cylinder push rod.

  1. Remove the clutch master cylinder push rod.


3. REMOVE PISTON AND SPRING
  1. Remove the piston and spring from the master cylinder.

← REMOVAL (from Sep 2011)REASSEMBLY (from Sep 2011) →