2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

DTC CHECK / CLEAR

Troubleshooting · Vehicles built Sep 2011 – Dec 2011


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Chassis / Parking Assist Monitor System / DTC.

  5. Check the details of the DTCs (Click here).


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Chassis / Parking Assist Monitor System / DTC.

  5. According to the display on the intelligent tester, select the trouble code data display with the clear button.

← DIAGNOSIS SYSTEM (Sep 2011 – Dec 2011)DATA LIST / ACTIVE TEST (Sep 2011 – Dec 2011) →