SYSTEM DESCRIPTION
Troubleshooting · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| GENERAL |
When the vehicle is driven at 9 km/h (5.8 mph) or less, the ultrasonic sensors detect any obstacles at the corners and rear of the vehicle. The system then informs the driver of the distance between the sensors and the obstacles as well as their positions by indicating them on the combination meter and by sounding a buzzer.
| FUNCTION OF COMPONENTS |
| Components |
Function |
| Ultrasonic sensor |
Ultrasonic sensor sends and receives ultrasonic waves. Based on received wave, sensor calculates the approximate distance value between vehicle and obstacle, and sends distance value as a signal to parking assist ECU*1 or clearance warning ECU*2 |
| Combination meter |
|
| Clearance sonar main switch |
Built into the drive monitor switch. Outputs system ON/OFF signals to parking assist ECU*1 or clearance warning ECU*2. |
|
|
| Park/neutral position switch |
Sends a signal that activates the TOYOTA parking assist-sensor system when the shift lever is moved to R. |
| Multi-display |
Receives the information from the parking assist ECU*1 or clearance warning ECU*2 through the CAN, and then displays the detection information. |
| No. 1 clearance warning buzzer |
Sounds the buzzer to inform the driver according to the distance to the obstacle. |
| Main body ECU |
Transmits destination symbol, dimmer signal and steering wheel symbol to parking assist ECU*1 or clearance warning ECU*2. |
| Air conditioning amplifier |
Transmits ambient temperature to parking assist ECU*1 or clearance warning ECU*2. |
| Windshield wiper ECU |
Transmits wiper status signal to parking assist ECU*1 or clearance warning ECU*2. |
- HINT:
- *1: w/ Parking Assist Monitor System
- *2: w/o Parking Assist Monitor System
| OPERATION EXPLANATION |
The ECU determines whether the TOYOTA parking assist-sensor system should be operated based on the clearance sonar main switch on/off status, the shift position and the vehicle speed.
When the system operates, the ECU transmits ultrasonic waves from the ultrasonic sensors. If these waves encounter an obstacle within one or more of the sensors' ranges, the waves are reflected back to the sensors, which transmit them to the ECU. Based on this information, the ECU sends signals to the multi-information display, the multi-display and the clearance warning buzzer. The approximate distance between the vehicle and the obstacle is then indicated, and the buzzer sounds.
- HINT:
- Refer to "Operation Check" for the detailed operation (Click here).