2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
When installing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.

Standard Heating Temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Emblem
20 to 30°C (68 to 86°F)
Name Plate
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, emblem and name plate excessively.


1. INSTALL SYMBOL EMBLEM

  1. B302225E01
    Clean the vehicle body surface.
    Text in Illustration 
    *1
    Boss

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new emblem.

    1. Using a heat light, heat the vehicle body and a new emblem.

    2. Remove the peeling paper from the face of the emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Align the boss positions and install the emblem.

      HINT:
      Press the emblem firmly to install it.


2. INSTALL REAR NO. 3 BODY NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new rear body name plate.

    1. Using a heat light, heat the vehicle body and a new rear body name plate.

    2. Remove the peeling paper from the face of the rear body name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. for Type A:
      Install the rear body name plate in the position shown in the illustration.

      HINT:
      Press the rear body name plate firmly to install it.


      B185927E02
      Text in Illustration 
      *A
      for Type A
      -
      -
      *a
      267.5 mm (10.2 in.)
      *b
      31.5 mm (1.24 in.)

    4. for Type B:
      Install the rear body name plate in the position shown in the illustration.

      HINT:
      Press the rear body name plate firmly to install it.


      B185928E02
      Text in Illustration 
      *A
      for Type B
      -
      -
      *a
      266 mm (10.5 in.)
      *b
      32 mm (1.26 in.)

    5. for Type C:
      Install the rear body name plate in the position shown in the illustration.

      HINT:
      Press the rear body name plate firmly to install it.


      B302226E01
      Text in Illustration 
      *A
      for Type C
      -
      -
      *a
      160.5 mm (6.32 in.)
      *b
      271 mm (10.7 in.)
      *c
      148 mm (5.83 in.)
      *d
      269 mm (10.6 in.)


3. INSTALL NO. 5 BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new back door name plate.

    1. Using a heat light, heat the vehicle body and a new back door name plate.

    2. Remove the peeling paper from the face of the back door name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. for Type A:
      Install the back door name plate in the position shown in the illustration.

      HINT:
      Press the rear body name plate firmly to install it.


      B302222E01
      Text in Illustration 
      *A
      for Type A
      -
      -
      *a
      32.5 mm (1.28 in.)
      *b
      266 mm (10.4 in.)
      *c
      240.8 mm (9.48 in.)
      -
      -

    4. for Type B:
      Install the back door name plate in the position shown in the illustration.

      HINT:
      Press the rear body name plate firmly to install it.


      B185930E02
      Text in Illustration 
      *A
      for Type B
      -
      -
      *a
      32.5 mm (1.28 in.)
      *b
      266 mm (10.4 in.)

    5. for Type C:
      Install the back door name plate in the position shown in the illustration.

      HINT:
      Press the rear body name plate firmly to install it.


      B185932E02
      Text in Illustration 
      *A
      for Type C
      -
      -
      *a
      32.5 mm (1.28 in.)
      *b
      266 mm (10.4 in.)


4. INSTALL BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new rear body name plate.

    1. Using a heat light, heat the vehicle body and a new rear body name plate.

    2. Remove the peeling paper from the face of the rear body name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the rear body name plate in the position shown in the illustration.

      HINT:
      Press the rear body name plate firmly to install it.


      B185933E02
      Text in Illustration 
      *A
      for Type C
      -
      -
      *a
      33 mm (1.30 in.)
      *b
      274 mm (10.8 in.)


5. INSTALL NO. 6 LUGGAGE COMPARTMENT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new rear body name plate.

    1. Using a heat light, heat the vehicle body and a new rear body name plate.

    2. Remove the peeling paper from the face of the rear body name plate.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the rear body name plate in the position shown in the illustration.

      HINT:
      Press the rear body name plate firmly to install it.


      B185934E02
      Text in Illustration 
      *A
      for Type C
      -
      -
      *a
      188.5 mm (7.42 in.)
      *b
      274 mm (10.8 in.)

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Sep 2011) →