REMOVAL
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
REMOVE CENTER BACK DOOR GARNISH
|
 |
- Detach the 5 clips and 4 claws, and remove the center back door garnish.
| 2.
REMOVE BACK DOOR SIDE GARNISH LH
|
 |
- Detach the 3 clips and 2 claws, and remove the back door side garnish LH.
| 3.
REMOVE BACK DOOR SIDE GARNISH RH
|
 |
w/o Power Back Door:
- HINT:
- Use the same procedure described for the LH side.
- w/ Power Back Door:
Detach the clip and 4 claws, and remove the back door side garnish RH.
| 4.
REMOVE BACK DOOR GARNISH
|
 |
- Using a screwdriver, detach the 14 clips and remove the back door garnish.
- HINT:
- Tape the screwdriver tip before use.
| 5.
REMOVE REAR TELEVISION CAMERA ASSEMBLY |
 |
Using a T30 "TORX" socket wrench, remove the 2 screws.
- Detach the 4 claws and remove the rear television camera assembly.
Disconnect the connector.