2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedures for the RHD and LHD.
  2. The procedures listed below are the LHD side.


1. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
  1. Remove the front passenger side knee airbag assembly (Click here).


2. REMOVE INSTRUMENT PANEL BOX DOOR KNOB

B182302
  1. Using a moulding remover, detach the 2 claws and remove the instrument panel box door knob.


3. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

B180304
  1. Remove the 4 bolts.

  1. Detach the 3 claws.

  1. Disconnect the connector and remove the lower No. 2 instrument panel finish panel.


4. REMOVE GLOVE BOX LIGHT ASSEMBLY

  1. E155904
    Remove the 2 screws and glove box light.

← REMOVAL (Sep 2011 – Dec 2011)INSPECTION (from Sep 2011) →