INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- HINT:
- When only replacing the room light bulbs, use the following procedures.
| 1. INSTALL MAP LIGHT BULB |
Turn the 2 map light bulbs in the direction indicated by the arrow to install them.

| 2. INSTALL MAP LIGHT ASSEMBLY (w/ Sliding Roof) |
Connect the connector.
Attach the 2 clips and 2 guides to install the map light.
Install the 2 screws.
Attach the 2 claws to close the 2 covers.


| 3. INSTALL MAP LIGHT ASSEMBLY (w/o Sliding Roof) |
Connect the connector.
Attach the 2 clips and 2 guides to install the map light.
Install the 2 screws.
Attach the 2 claws to close the 2 covers.


