2011-2013 Land Cruiser · Service Manual Vehicle Exterior

DISASSEMBLY

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE NO. 1 HEADLIGHT BULB

  1. E155818
    Turn the bulb in the direction indicated by the arrow and remove it.


2. REMOVE NO. 2 HEADLIGHT BULB

  1. E155819
    Turn the bulb in the direction indicated by the arrow and remove it.


3. REMOVE FRONT TURN SIGNAL LIGHT BULB

  1. E157696
    Turn the bulb in the direction indicated by the arrow and remove it.


4. REMOVE CLEARANCE LIGHT BULB

  1. E155820
    Turn the bulb in the direction indicated by the arrow and remove it.


5. REMOVE HEADLIGHT LEVELING MOTOR LH

  1. E155823E01
    Disconnect the connector.

  1. Turn the motor in the direction indicated by the arrow (1) in the illustration to disconnect it.

  1. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to disconnect the shaft.

  1. Pull the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to remove it.

← REMOVAL (from Jan 2012)DISASSEMBLY (from Jan 2012) →