2011-2013 Land Cruiser · Service Manual Vehicle Exterior

DISASSEMBLY

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE NO. 1 HEADLIGHT COVER (w/ Projector Headlight)

  1. E244765
    Turn the No. 1 headlight cover in the direction indicated by the arrow in the illustration and remove the No. 1 headlight cover.


2. REMOVE HEADLIGHT GASKET (w/ Projector Headlight)
  1. Remove the headlight gasket from the No. 1 headlight cover.


3. REMOVE NO. 2 HEADLIGHT BULB (w/ Projector Headlight)

  1. E244766
    Disconnect the connector.

  1. Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb.

    NOTICE:
    Do not touch the glass part of the No. 2 headlight bulb.


4. REMOVE NO. 1 HEADLIGHT BULB (w/ Projector Headlight)

  1. E244767
    Disconnect the connector.

  1. Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb.

    NOTICE:
    Do not touch the No. 1 headlight bulb glass.


5. REMOVE FRONT TURN SIGNAL LIGHT BULB (w/ Projector Headlight)

  1. E244768
    Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.

  1. Remove the front turn signal light bulb from the socket.


6. REMOVE HEADLIGHT LEVELING MOTOR LH (w/ Projector Headlight)

  1. E247042E01
    Disconnect the connector.

  1. Turn the motor in the direction indicated by the arrow (1) in the illustration to disconnect it.

  1. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to disconnect the shaft.

  1. Pull the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to remove it.


7. REMOVE NO. 1 HEADLIGHT BULB (w/o Projector Headlight)

  1. E155819
    Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb.

    NOTICE:
    Do not touch the glass part of the No. 1 headlight bulb.


8. REMOVE NO. 2 HEADLIGHT BULB (w/o Projector Headlight)

  1. E155818
    Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb.

    NOTICE:
    Do not touch the glass part of the No. 2 headlight bulb.


9. REMOVE FRONT TURN SIGNAL LIGHT BULB (w/o Projector Headlight)

  1. E157696
    Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.

  1. Remove the front turn signal light bulb from the socket.


10. REMOVE CLEARANCE LIGHT BULB (w/o Projector Headlight)

  1. E155820
    Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.

  1. Remove the clearance light bulb from the socket.


11. REMOVE HEADLIGHT LEVELING MOTOR LH (w/o Projector Headlight)

  1. E155823E01
    Disconnect the connector.

  1. Turn the motor in the direction indicated by the arrow (1) in the illustration to disconnect it.

  1. Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to disconnect the shaft.

  1. Pull the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to remove it.

← DISASSEMBLY (Sep 2011 – Dec 2011)ADJUSTMENT (Sep 2011 – Dec 2011) →